![background image](http://html.mh-extra.com/html/makita/ebh340r/ebh340r_instruction-manual_223031006.webp)
6
Never straighten or weld damaged cutting blades.
– Be kind to the environment. Operate the brush cutter with as
little noise and pollution as possible. In particular check the
correct adjustment of the carburetor.
– Clean the brush cutter at regular intervals and check that all
screws and nuts are securely tightened.
– Never service or store the brush cutter in the vicinity of open
flames, sparks, etc.
– Always store the brush cutter in a well-ventilated locked room
and with an emptied fuel tank.
Observe and follow all relevant accident prevention instructions
issued by the trade associations and by insurance companies.
Do not perform any modifications to the brush cutter as this will
risk your safety.
The performance of maintenance or repair work by the user is
limited to those activities s described in this instruction manual. All
other work is to be done by Authorized Service Agents.
Use only genuine spare parts and accessories supplied by
MAKITA.
Use of non-approved accessories and tools means increased risk
of accidents and injuries. MAKITA will not accept any liability for
accidents or damage caused by the use of any non-approved
cutting tools attachments or accessories.
First Aid
In case of accident make sure that a well-stocked first-aid kit is
available in the vicinity of the cutting operations. Immediately
replace any item taken from the first aid box.
When asking for help, please give the following informa-
tion:
– Place of accident
– What happened
– Number of injured persons
– Extent of injuries
– Your name
Packaging
The MAKITA brush cutter is delivered in two protective cardboard
boxes to prevent shipping damage.
Cardboard is a basic raw material and is therefore consequently
reusable or suitable for recycling (waste paper recycling).
Содержание EBH340R
Страница 22: ...MEMO ...
Страница 23: ......
Страница 24: ...6119522700 08 02 Makita Corporation 3 11 8 Sumiyoshi cho Anjo Aichi 446 8502 Japan ...