Makita EBH340R, Инструкция по эксплуатации

Страница: 3 / 24

3
SAFETY INSTRUCTIONS
General Instructions
– To ensure correct and safe operation, the user must read,
understand and follow this instruction manual to assure
familiarity with the handling of the brush cutter. Users insuffi-
ciently informed will risk danger to themselves as well as others
due to improper handling.
– It is recommended only to loan the brush cutter to people who
have proven to be experienced with brush cutters.
Always hand over the instruction manual.
– Use brush cutters with the utmost care and attention.
– First-time users should ask the dealer for basic instructions to
familiarize oneself with the handling of an engine powered
cutter.
– Children and young persons aged under 18 years must not be
allowed to operate the brush cutter. Persons over the age of
16 years may however use the tool for the purpose of being
trained only while under the direct supervision of a qualified
trainer.
– Use brush cutters with the utmost care and attention.
– Operate the brush cutter only if you are in good physical
condition. Perform all work conscientiously and carefully. The
user has to accept responsibility for others.
– Never use the brush cutter while under the influence of alcohol
or drugs.
– Do not use the unit when you are tired.
– Save these instructions for future referral.
Personal protective equipment
– The clothing worn should be functional and appropriate, i.e. it
should be tight-fitting but not cause hindrance. Do not wear
jewelry, clothing or long hair which could become entangled
with bushes or shrubs.
– In order to avoid head-, eye-, hand- or foot injuries as well as to
protect your hearing the following protective equipment and
protective clothing must be used during operation of the brush
cutter.
– Always wear a helmet when working in the forest. The
protective helmet (1) is to be checed at regular intervals for
damage and is to be replaced at least every 5 years. Use only
approved protective helmets.
– The visor (2) of the helmet (or approved goggles) protects the
face from flying sticks, stones or other object. During operation
of the brush cutter always wear goggles, or a visor to prevent
eye injuries.
– Wear adequate noise protection equipment to avoid hearing
impairment (ear muffs (3), ear plugs etc.), especially during
extended work periods.
– The work overalls (4) protect against flying stones and
splinters.
We strongly recommend that the user wear work overalls.
– Special gloves (5) made of thick leather are part of the pre-
scribed equipment and must always be worn during operation
of the brush cutter.
– When using the brush cutter, always wear sturdy shoes (6)
with a non-slip sole. This protects against injuries and ensures
good footing.
Starting up the brush cutter
– Please make sure that there are no children or other people
within a working range of 50 ft. or 15 meters, also pay attention
to any animals in the working vicinity.
– Before operating, always check that the brush cutter is
safe for operation:
Check the security of the cutter blade. Be sure the blade
mounting nut is firmly secured. The throttle lever should be
checked for smooth and easy action. Check for proper
functioning of the throttle lever lock. The cutter blade must not
rotate during idling.
Consult idle adjustment instructions on page 16. Check for
clean and dry handles and test the function of the STOP switch.
Keep handles free of oil and fuel.
– Before operation, check and follow local; regulations concern-
ing sound level and hours of operations.
– Only start the brush cutter positioned on the ground.
– Do not start it on the back.
1
2
3
4
5 6