Makita DVC150L, Инструкция по эксплуатации

Страница: 12 / 108

12 ENGLISH
NOTICE:
Before using the po der filter, make
sure that prefilter and damper are al ays used
together.
It is not allowed to install powder filter solely.
Installing the ater filter
Optional accessory for cloth filter model
CAUTION:
Never pick up water or wet dust with-
out the oat and the cloth filter or the ater filter.
CAUTION:
For picking up wet dust, make sure that
the oat cage and the oat are installed on the cleaner.
CAUTION:
When installing the ater filter on
the tank, set it tight at the opening of the tank so
that the hook of the ater filter engages the tank
opening firmly and there is no space bet een the
ater filter and the tank.
To pick up water or wet dust only, the water filter is more
suitable than the cloth filter.
When installing the water filter, align its mounting posi
-
tion mark w ith th e one on th e tank.
Fig.15: 1.
Water filter
2. T ank 3. Mounting position
marking
NOTE:
It is recommended using water filter when
pic king up large amount of w ater repeated ly .
O th erw ise v ac uum ability may be red uc ed in c ase of
cloth filter.
Installing the paper pack
Optional accessory
WARNING:
W hen using the paper pack, also
use the cloth filter or prefilter together that is
preinstalled on the cleaner. F ailure to use th e c loth
filter / prefilter together may cause unusual noise and
heat, resulting in a fire.
CAUTION:
(For the cloth filter model)
• Never pick up water or other liquids or wet
dusts when using the paper pack.
P ic king
up suc h th ings may c ause th e paper pac k
breakage.
• Before using the paper pack, make sure that
po der filter (optional accessory), damper
(optional accessory) and prefilter are al ays
used together.
CAUTION:
(For the powder filter model)
• Before using the paper pack, make sure
that po der filter, damper and prefilter are
always used together.
1. R emov e th e rubber h old er.
Fig.16: 1. R ubber h old er
2. Ex tend th e paper pac k.
3. A lign th e paper pac k opening w ith th e d ust suc tion
opening of th e c leaner.
4. I nsert th e c ard board of th e paper pac k onto th e
h old er so th at it is positioned at th e end bey ond th e
d etent protrusion.
Fig.17: 1. P aper pac k 2. H old er
Installing the polyethylene bag
C leaner c an also be used w ith out poly eth y lene bag.
H ow ev er, using poly eth y lene bag is easier to empty th e
tank w ith out letting y our h and s d irty .
S pread th e poly eth y lene bag in th e tank. I nsert it betw een
th e h old er plate and th e tank, and pull it to th e h ose inlet.
Fig.18 : 1. H old er plate 2. P oly eth y lene bag
S pread th e bag around th e top of th e tank so th at th e c loth
filter / prefilter edge can catch and hold the bag securely.
Fig.19: 1.
Cloth filter / prefilter
NOTE: A poly eth y lene bag av ailable on th e
market c an be used . 0.04 mm or th ic ker one is
rec ommend ed .
NOTE: T oo muc h d ust w ill tear th e bag easily , so
d o not c ollec t th e d ust more th an th e h alf of th e bag
c apac ity .
Emptying the polyethylene bag
WARNING:
Always make sure that the cleaner
is switched off, unplugged, and the battery car-
tridge is removed before emptying the polyeth-
ylene bag.
F ailure to d o so may c ause an elec tric
shock and serious personal injury.
CAUTION:
Do not apply a great impact on the
oat cage and tank.
A pply ing a great impac t may
c ause d ef ormation and d amage to th e parts.
CAUTION:
Empty the tank at least once a day
although this depends on picked-up dust volume
in the tank.
O r, th e suc tion f orc e w ill w eaken and th e
motor may be broken.
CAUTION:
Do not grab the hook when empty-
ing the tank. G rabbing th e h ook may c ause th e h ook
to break.
U nh ook and lif t up th e tank c ov er.
Shake off the dust from the cloth filter / prefilter and then
take th e poly eth y lene bag out of th e tank.
Fig.20
NOTE: T ake th e poly eth y lene bag c aref ully out of th e
tank so th at th e poly eth y lene bag c annot be c augh t
and torn by th e protrusion insid e th e tank w h en emp-
ty ing it.
NOTE: Empty th e poly eth y lene bag bef ore it
bec omes f ull. T oo muc h d ust in th e tank may c ause
th e poly eth y lene bag to be torn.
Installing the tool box
1. R elease th e loc k of th e battery c ov er, and open
th e battery c ov er.
2. S et th e rails on th e tool box along th e groov es on
th e h ousing.
3. C lose th e battery c ov er and apply th e loc k.
Fig.21
T h e tool box is c onv enient f or c arry ing batteries, ex ten-
sion c od e, pipe, or c uf f s.
Fig.22