Makita DUP180Z, Инструкция по эксплуатации, Страница: 8 / 20

8 ENGLISH
FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before adjusting or checking function on the tool.
Installing the connection cord
First, align the triangular mark of the female socket of
the connection cord with the triangular mark of the male
connector of the tool. Push in the socket of the connec-
tion cord to the connector of the tool. Then, align the
marking on the coupling with the triangular marks, and
push in and turn the coupling to tighten.
3
1
2
4
5
1
Fig.2
► 1. Triangular mark 2. Connection cord 3. Tool
4. Marking on coupling 5. Coupling
NOTICE:
Turn the coupling and align the mark-
ing on the coupling with the triangular marks first
when disconnecting the connection cord.
Installing or removing battery
cartridge
CAUTION:
Always switch off the tool before
installing or removing of the battery cartridge.
CAUTION:
Hold the battery adapter and the
battery cartridge firmly when installing or remov -
ing battery cartridge. Failure to hold the battery
adapter and the battery cartridge firmly may cause
them to slip off your hands and result in damage to
the tool, battery adapter and battery cartridge and a
personal injury.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator as
shown in the figure, it is not locked completely.
To remove the battery cartridge, slide it from the bat-
tery adapter while sliding the button on the front of the
cartridge.
CAUTION:
Always install the battery cartridge
fully until the red indicator cannot be seen. If not,
it may accidentally fall out of the tool, causing injury to
you or someone around you.
CAUTION:
Do not install the battery cartridge
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
3
2
4
1
Fig.3
► 1. Red indicator 2. Button 3. Battery cartridge
4. Battery adapter