Makita DUP180Z, Инструкция по эксплуатации, Страница: 12 / 20

12 ENGLISH
3. Loosen the nut with the box wrench, and then
remove it.
1
Fig.11
► 1. Nut
4. Turn over the tool, and then remove the bolt, blade
holder, upper shear blade, and lower shear blade in
order.
1
2
3
4
Fig.12
► 1. Bolt 2. Blade holder 3. Upper shear blade
4.
Lower shear blade
5. Attach the lower shear blade, upper shear blade,
blade holder, and bolt to the tool in order.
1
2
3
4
Fig.13
► 1. Bolt 2. Blade holder 3. Upper shear blade
4. Lower shear blade
NOTICE:
When attaching the upper shear blade,
make sure that the upper shear blade is placed in
the direction shown in the figure.
6. Turn over the tool, and then attach the nut to the
tool and tighten it manually.
1
Fig.14
► 1. Nut
NOTICE:
The recommended tightening torque is
approximately 0.5 N•m.
7. Attach the bolt to the tool and tighten it with the
hex wrench.
1
Fig.15
► 1. Bolt
8.
Turn over the tool, then attach the cover to the
tool, and then tighten the bolts with the hex wrench.
1
2
Fig.16
► 1. Bolt 2. Cover