5-3
Anvil N
5-3-1
Disassembling
[1] Remove Hammer case complete from Housing L. (5-1-1 Disassembling)
5-3-2
Assembling
Assemble by reversing the disassembly procedure.
Fig. 5-3-1-1
[2] Use 1R232 for holding Anvil N firmly for
easy removal of Ring spring 11.
Fig. 5-3-1-2
[3] Remove Ring spring 11 while checking the following points.
·
Press the top of Bit sleeve with a thumb so as not to pop out
Compression spring 13.
·
Expand the end gap of Ring spring 11 with 1R003, 1R212-B and
1R212-A.
1R232
Hammer case
complete
Ring spring 11
1R212-B
1R212-A
Fig. 5-3-1-3
[4] Bit sleeve section can be disassembled as shown below.
Flat washer 12 Compression
spring 13
Steel ball 3.5
Ring spring 11
Bit sleeve
Anvil N
Steel ball 3.5
1R003
11 / 19
