R
epair
ASSEMBLING
ASSEMBLING
P 10/ 18
Assemble Rotor by reversing the disassembly procedure.
Note
: Be careful not to pinch your fingers between Rotor and Stator complete. (Refer to
Fig. 12
.)
Fig. 14
Disassemble Safety cover as drawn in
Fig. 8
.
DISASSEMBLING
[3] -4. Safety cover
(1) Set Safety cover to the drum portion of Bearing box.
(2) Tension spring 4 has to be connected to Safety cover and Blade case, and assemble Retaining ring S-34. (
Fig. 14
)
Area of Bow
formed portion
1. Hook one end of Tension spring 4 through
the hole of Safety cover from Motor housing
side to Blade side.
2. Hook the other end of Tension spring 4
through the hole of Blade case from
Blade side to Motor housing side.
Retaining ring S-34
3. Using 1R003, Set Retaining ring S-34 in place with 1R003.
Note
: Bring the opening within the area of bow formed portion.
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Rotor (cont.)