R
epair
P 12/ 18
Fig. 16
Fig. 17
Adjust and assemble Top guide as drawn in
Fig. 16
.
1. Adjust 0° notch line of Top guide so that it comes to
0.5 mm line of the base metal of the saw blade.
2. Tighten Top guide with M5x8 Pan head screw
while keeping it in the adjusted position.
0.5 mm
Line of the base metal of
the saw blade
ASSEMBLING
ASSEMBLING
Lock off lever
Lock off lever
Compression spring 4
Note
: Compression spring 4 for Lock off lever is the same
as that for Switch lever.
Assemble Lock off lever and Switch lever
to Handle L as shown below.
Switch lever
Switch lever
[3] -7. Lock off lever, Switch lever
M5x8 Pan head screw
the base metal of the saw blade
Tip portion
of Saw blade
0° notch line of Top guide
Handle L
[3] DISASSEMBLY/ASSEMBLY
[3] -6. Top guide
Insert Compression spring 4 over the boss
on the back of Lock off lever until it stops.
Insert Compression spring 4 over the boss
on the back of Switch lever until it stops.