P 4/ 18
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Base (cont.)
DISASSEMBLING
(1) Separate Base section from the machine. (
Fig. 4
)
(2) Disassemble Angular guide section as drawn in
Fig. 5
.
(3) Disassemble Base section as drawn in
Fig. 6
.
3. Remove M5x8 Hex socket
head set screw which functions
as a stopper for 6-7 Shoulder pin.
4. Remove
6-7 Shoulder pin.
1. Remove
Stop ring E-8.
2. Remove M6x20 Hex bolt, Lever 45 and Flat washer 6.
5. Remove Angular guide.
Fig. 4
Fig. 5
Fig. 6
Base section
6-7 Shoulder pin
Top guide
Bevel guide
Compression
spring 6
M5x20
Thumb screw
M5x8 Hex socket
head set screw
M4x6 Hex socket
head set screw
Note in Disassemble
:
Be careful not to lose four M5x8 Hex socket head
set screws used for the following:
* stopping 6-7 Shoulder pin of
Depth guide. (See the
top right
in
Fig. 3
.)
* stopping 6-7 Shoulder pin of Angular guide.
(See the
bottom left
in
Fig. 5
.)
* (a) adjusting 45° bevel
* (b) adjusting 90° bevel
(a)
(b)
M5x8 Pan
head screw
Stop ring E-8
M5x8 Hex socket
head set screw
Angular guide
M6x20 Hex bolt
Lever 45
Flat washer 6
