P 13/ 13
W
iring diagram
Fig. D-6
[3] Wiring in Handle
Route Lead wires as illustrated in
Fig. D-6
.
Power supply circuit
Handle R
Assemble Power supply circuit to Handle R
with Lead wire (white) on Handle R side.
Lead wire (white)
Coil Lead wires (red, black) once
into Line filter one by one.
Lead wire holders
Lead wire holders
Fix lead wires in lead wire holders
as designated by arrows.
Controller
Line filter (short)
Note
: Line filters are not used for some countries.
Line filter (long)
Pass Lead wire (black) from Endbell complete through
Line filter, then connect the lead wire to Switch terminal No. 1
and place the line filter as drawn below.