![background image](http://html1.mh-extra.com/html/makita/dcg180zbk/dcg180zbk_instruction-manual_3913952002.webp)
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model DCG140
DCG180
Max feed force
5000 N
Feed speed
0 - 28 mm/s
with short (300ml) holder
214 mm
Stroke
with long (600ml) holder
350 mm
with short (300ml) holder
404 mm
Overall length
with long (600ml) holder
538 mm
Standard battery cartridge
BL1415 /
BL1415N
BL1430 /
BL1440
BL1815 /
BL1815N/BL1820
BL1830 /
BL1840/BL1850
with short (300ml) holder
2.0 kg
2.2 kg
2.1 kg
2.3 kg
Net weight
with long (600ml) holder
2.4 kg
2.6 kg
2.5 kg
2.7 kg
Rated voltage
D.C.14.4 V
D.C.18 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END004-4
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
・
Read instruction manual.
・
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and electronic
equipment, 2006/66/EC on batteries and
accumulators and waste batteries and
accumulators and their implementation in
accordance with national laws, electric
equipment and battery pack that have
reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling facility.
ENE086-1
Intended use
This tool is intended for applying caulking material to
surface.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Sound pressure level (L
pA
) : 70 dB (A) or less
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Vibration emission (a
h
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
•
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
Cd
Ni-MH
Li-ion