![background image](http://html.mh-extra.com/html/makita/cru03/cru03_instruction-manual_232709010.webp)
10 ENGLISH
NOTE:
During the reverse rotation, the tool operates only
for a short period of time and then automatically stops.
NOTE:
Once the tool is stopped, the rotation returns
to regular direction when you start the tool again.
NOTE:
If you tap the reverse button while the cutting
tool is still rotating, the tool comes to stop and to be
ready for reverse rotation.
Electric brake
This tool is equipped with an electric brake. If the tool
consistently fails to quickly stop after the switch trigger
is released, have the tool serviced at our service center.
CAUTION:
This brake system is not a substitute for
the protector. Never use the tool without the protector.
An
unguarded cutting tool may result in serious personal injury.
Electronic function
Constant speed control
The speed control function provides the constant rota-
tion speed regardless of load conditions.
Soft start feature
Soft start because of suppressed starting shock.
ASSEMBLY
WARNING:
Always be sure that the tool is
switched off and the portable power pack is disconnected
from the tool before carrying out any work on the tool.
Failure to switch off and disconnect the portable power pack
may result in serious personal injury from accidental start-up.
WARNING:
Never start the tool unless it is completely
assembled.
Operation of the tool in a partially assembled state
may result in serious personal injury from accidental start-up.
Installing the handle
1.
Attach the upper and lower clamps on the damper.
2.
Put the handle on the upper clamp and fix it with
hex socket head bolts as illustrated.
1
2
3
5
4
►
1.
Hex socket head bolt
2.
Handle
3.
Upper clamp
4.
Damper
5.
Lower clamp
Hex wrench storage
CAUTION:
Be careful not to leave the hex
wrench inserted in the tool head.
It may cause
injury and/or damage to the tool.
When not in use, store the hex wrench as illustrated to
keep it from being lost.
1
►
1.
Hex wrench
1
►
1.
Hex wrench
Correct combination of the cutting
tool and the protector
CAUTION:
Always use the correct combi-
nation of cutting tool and the protector.
A wrong
combination may not protect you from the cutting tool,
flying debris, and stones. It can also affect the bal
-
ance of the tool and result in an injury.
Cutting tool
Protector
Nylon cutting head
Содержание CRU03
Страница 15: ...15 ENGLISH 95 M10L 3 m 9 ft 80 mm 3 1 8 100 mm 3 15 16 ...
Страница 16: ...16 ENGLISH B F ECO 4L 3 m 9 ft 80 mm 3 1 8 100 mm 3 15 16 ...
Страница 33: ...33 ESPAÑOL 95 M10L 3 m 9 ft 80 mm 3 1 8 100 mm 3 15 16 ...
Страница 34: ...34 ESPAÑOL B F ECO 4L 3 m 9 ft 80 mm 3 1 8 100 mm 3 15 16 ...