9
Back strap adjustment
Adjust back strap to a length that brings the sprayer as
close to the body as feasibly possible.
Lengthening strap
(1) Lift
up
buckle.
(2) Pull the belt on the side connected to the
sprayer.
Fig.3
Shortening strap
Pull the belt on the free side.
Fig.4
NOTE:
When shortening the strap, it will move relatively easily if
there is no weight exerted on the strap.
MAINTENANCE
CAUTION:
•
Always be sure that the tool is switched off and the
battery cartridge is removed before attempting to
perform inspection or maintenance.
•
For inspection and maintenance, always wear
protective gloves.
After-use maintenance
•
After use, remove residual liquid from chemical
tank, and wash away clinging chemical from inside
of tank using clean water.
•
Now fill up chemical tank with clean water and run
the sprayer for 2 to 3 minutes to wash out residual
chemical from the pump, hose, and nozzle, etc.
•
Remove the residual liquid from inside the
chemical tank, restart the pump, and run the
sprayer until residual liquid ceases to come out of
the nozzle, and then turn sprayer switch OFF.
•
Wipe away moisture and dirt from equipment, and
then check for damage and leaks.
Daily checks
•
Before work, check to see whether or not fastened
units are loose and components are missing.
•
Check to make sure the spray hose is not cracked,
worn and/or damaged.
•
After use, always be sure to wipe dirt off of exterior,
and to check for damage and/or leaks.
Cleaning water absorption strainer
Fig.5
After removing chemical from tank, remove the water
absorption strainer at the bottom of the tank, and clean
it.
Cleaning lever cock strainer
Fig.6
Remove lever cock cap and clean strainer.
NOTE:
Water absorption strainer
•
This is a filter used to prevent dirt and dust (that for
some reason has got passed the tank strainer into
the tank) from getting into the pump. If the water
absorption strainer becomes blocked, spraying will
deteriorate, and there is a risk of the pump being
adversely affected.
Lever cock strainer
•
Spraying deteriorates if the lever cock strainer
becomes blocked.
Sprayer storage
•
Wash the equipment using the after-use
maintenance procedures.
•
In particular, when storing during the winter season,
breakdown or damage may occur due to freezing
of residual chemical and/or washing water in the
pump. Run the pump until all residual liquid has
exited from the nozzle, check to make sure there is
no more residual liquid, turn the sprayer switch
OFF, and then store the sprayer away.
CAUTION:
Store the Garden Sprayer out of reach of children, in an
indoor locale that does not freeze, is away from direct
sunlight, and has good ventilation.
−
Take full care in storing the sprayer, as, in some
cases, the plastic components will deteriorate
markedly if left in direct sunlight for a prolonged
period; moreover, product caution labels will
discolor and/or come off.
Useful Tips
Spray pipe holder
Be sure to attach the holder in the right direction.
1
010139
NOTE:
•
For configuration reasons, force is required in the
attaching process, but care should be taken not to
bend the spray pipe.
Use the holder when taking a rest, replenishing chemical
liquid, and at times of storage, etc.
Fig.7
1. Spray pipe holder
