P 13/16
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Clutch Section (cont.)
R
epair
ASSEMBLING
Fig. 38
Fig. 39
Fig. 40
Ball bearing 608
Steel ball 4
(3 pcs)
Steel ball 3.5
Clutch cam C
Helical gear 48
Assembly of Helical gear 48
Spindle B
Flat washer 25 (2 pcs)
Sleeve 20
O Ring 18
Dust cover
Plane bearing 14
Gear complete 18-44
Plane bearing 5
(front)
Plane bearing 5
(rear)
Flat washer 5
3) Apply Makita grease FA.No.2 to
the inside wall of Clutch cam C
to prevent Steel balls from falling
off from Clutch cam C.
5) Assemble the parts illustrated below into Clutch section.
6) Assemble Gear complete 18-44 to Housing (L).
Note: Do not forget to put Flat washer 5 between
Gear complete 18-44 and Plane bearing 5 (front).
4) Put each Steel ball 4 in the concave portion on the inside wall
of Clutch cam C.
Then assemble Clutch cam C to Helical gear 48.
Note:
Apply Makita grease FA.No.2 to the cam portion
of Spindle B to prevent Flat washer 25 (2 pcs)
from falling off from Spindle B.
