P 11/16
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Stopper Base Section
R
epair
DISASSEMBLING
Disassemble by taking the steps described in Fig. 28 to Fig. 31.
Fig. 28
Fig. 29
Fig. 30
Fig. 31
Guide box complete
Guard
Stopper base
slotted screwdriver
1) Remove Guide box complete from Stopper base together with
Guard first by inserting slotted screwdriver into the rectangular
hole of Stopper base, then by pushing Guide box complete
with the screwdriver.
rectangular hole
Guard
Guide box complete
2) Separate Guard from Guide box complete.
1R266
1R032
3) Guide box complete can be disassembled as illustrated below
using 1R032, 1R266 and arbor press.
(The parts with asterisk: one each on left and right side)
4) Cap can be removed from Stopper base
using slotted screwdriver.
Pin 2*
Guide*
Torsion spring 4*
Guide box
Stopper base
Cap
[3] -3. Clutch Section
DISASSEMBLING
Disassemble by taking the steps described in Fig. 32 to Fig. 36.
Fig. 32
1) After removing Casing assembly (Fig. 2 on page 4),
disassemble Front cover from Housing together with
Guide attachment.
2) Remove Belt clip from Housing by pulling
in the direction of the gray arrow while opening
the ends in the directions of the black arrows.
Tapping screw 4x18
(2 pcs)
Front cover
Guide attachment
Housing
Belt clip
