R
epair P 3 / 14
Hex socket head bolt M5x18
Base
Torsion spring 6
Tool opener
Pan head screw M4
< 2 > Disassembling tool opener
1. Separate base from the jig saw unit by unscrewing hex socket head bolt M5x18. See Fig. 1.
2. Unscrew pan head screw M4. Then tool opener and torsion spring 6 can be disassembled. See Fig. 1A.
< 3 > Assembling tool opener
1. Put torsion spring 6 into tool opener . And fasten tool opener with pan head screw M4. See Fig. 1A above.
2. Bring the tail of torsion spring 6 which is extruding from tool opener, to the original position by turning it
clockwise. See Fig. 2.
Fig. 1
Fig. 1A
The tail of
torsion spring 6
The tail of torsion spring 6 pushed
into the original position.
Blade holder
Tool opener
Fig. 2
Gear housing cover
Gear
housing
Bottom view
(View from blade holder side)
< 4 > Disassembling head cover section (Model 4341T / 4341CT / 4341FCT)
1. Separate head cover R from head cover L by unscrewing the following screws. See Fig. 3.
2 pcs. of tapping screws 4x40,
1 pc. of tapping screw M4x50
2 pcs. of tapping screws 4x40
1 pc. of tapping screw M4x50
Head cover R
Head cover L
Fig. 3
< Note in disassembling >
Head covers R and L have spikes respectively for fixing on motor housing.
Be careful, not to break them, when disassembling.
