![background image](http://html1.mh-extra.com/html/makita/4341ct/4341ct_hardware-technical-information_4108286008.webp)
R
epair P 8 / 14
< 9 >Disassembling parts in gear housing
2. Locking crank complete with something bar-formed metal, unscrew 2 pcs. of hex socket head bolts M4 x 12 as
illustrated in Fig.19.
3. Disassemble retaining S-8. Then, the inner parts can be disassembled from gear housing as illustrated in Fig.20.
< Note in disassembling>
2 pcs. of hex socket head bolts M4 x 12 are adhesive bolts.
It is recommended to unscrew them with impact driver.
2 pcs. of hex socket
head bolts M4 x 12
Crank complete
Balance plate
No.1R235
Round bar for arbor
Fig.19
Fig.20
Retaining ring S-8
1. After taking off safety wire from gear housing cover, unscrew 4 pcs. of tapping screws CT 4 x 16.
Separate gear housing cover from gear housing. See Fig. 18.
4341T, 4341CT, 4341FCT
4 pcs. of
Tapping screws CT 4 x 16
Safety wire
Gear housing cover
Fig. 18
Retaining S-8
Push plate
Seal plate
Needle bearing 407
Flat washer 8
Gear housing
Balance plate
Gear complete