R
epair P 12 / 14
< 14 > Disassembling switch rod (4341T, 4341CT, 4341FCT)
1. With referring to "< 11 > Disassembling armature (4341T, 4341CT, 4341FCT)" at page 10, disassemble rear cover.
2. Disassemble the following parts from motor housing. See Fig. 38.
3. Disconnect switch rod from switch lever by pulling. Then, switch rod can be disassembled from motor housing.
See Fig. 39.
Model No.
Parts to be disassembled
4341FCT
LED circuit, Switch, Switch block unit, Controller
4341CT
Switch, Switch block unit, Controller
4341T
Switch, Switch block unit,
LED circuit
Switch
Switch block unit
Controller
Switch rod
Fig. 38
Fig. 39
1. Insert switch rod into motor housing and align the wide square hole of switch rod with the wide square hole of
motor housing. See Fig. 40 and Fig. 40A.
2. Pressing the switch rod to the wall of motor housing, insert switch lever into the aligned wide square holes as
illustrated in Fig. 38A.
3. Pushing the switch rod to the gear housing side, interlock switch lever with switch rod.
4. Connect lead wire from LED circuit to controller.
< 15 > Assembling switch rod
Fig. 40A
Switch lever
Press the inserted switch rod
to the wall of motor housing
with aligning the wide square
holes of switch rod to the wide
square hole of motor housing.
Switch lever
Motor housing
Motor housing
Switch rod
Switch rod
Wide square hole
of switch rod
Wide square hole
of motor housing
Fig. 40
