![background image](http://html.mh-extra.com/html/makita/4323/4323_instruction-manual_230046009.webp)
9
OPERATION
CAUTION:
•
Always hold the base flush with the workpiece. Failure to
do so may cause blade breakage, resulting in a serious
injury.
•
Advance the tool very slowly when cutting curves or
scrolling. Forcing the tool may cause a slanted cutting
surface and blade breakage.
Turn the tool on without the blade making any contact and
wait until the blade attains full speed. Then rest the base flat
on the workpiece and gently move the tool forward along the
previously marked cutting line.
Bevel cutting
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before tilting the base.
•
Raise the dust cover all the way before making bevel
cuts.
With the base tilted, you can make bevel cuts at any angle
between 0
°
and 45
°
(left or right).
Loosen the bolt on the back of the base with the hex wrench.
Move the base so that the bolt is positioned in the center of
the cross-shaped slot in the base.
1. Cutting line
2. Base
1
2
002743
002746
1. Hex wrench
2. Bolt
3. Base
1
2
3
002748