MAKINEX MCP-6-SS, Руководство оператора

Страница: 13 / 23

MCP-6-SS
– User Manual
Page 11 of 21
WALL MOUNTING
The MCP has eight (8) x 9 mm diameter wall mounting through holes on the rear of
the body which can be used instead of, or in addition to, positioning the unit in place
using the wheel brakes. When installing the unit in a wall mount setting, a spacer must
be placed between the back of the unit and the wall. This is to allow the ventilation
holes to remain unobstructed. The illustration below shows the method of installation.
Prior to mounting the unit, holes must be drilled to the appropriate size in the wall to
receive the fasteners used to wall mount the unit. A typical M8 bolt will fit through the
holes. Be sure to use the appropriate bolts depending on what surface the unit is being
mounted to e.g. masonry, steel, wood fasteners etc., etc.