MAKINEX MCP-6-SS, Руководство оператора

Страница: 10 / 23

MCP-6-SS
– User Manual
Page 8 of 21
INSTRUCTION FOR USE
WARNING
Read and adhere to all safety and operation instructions.
OPERATING MCP
CAUTION
Always have the brakes engaged while it is stationary.
POWERING THE MCP
1. Remove all loads from the Dual 10A outlets.
2.
Ensuring th
e mains power switch (if fitted) is in the ‘off’ position, unwind the electrical
cable on top of the unit and connect it to the mains socket. Make sure no trip hazard
is created from the cable.
3.
Turn the mains switch to the ‘on’ position.
4.
Ensure the breake
r on the MCP is in the ‘on’ position (contact a qualified electrician
if in the ‘off’ position).
5.
The MCP now has power.
OPENING THE LOCKERS
The MCP comes with six (6) independent padlock-able lockers for storage-during-charging
of electrical site equipment.
1. Place the charging equipment in the locker while feeding the electrical lead towards
the centre of the MCP so it rests inside the cut-out between where the door closes
and the body. Make sure the testing tag is left outside the locker for easy inspection.
2. After making sure the keys have not been left in the locker, close the door and replace
the padlock.
CONNECTING ELECTRICAL DEVICES
The MCP can supply 230V AC through six (6) dual 10 amp double pole outlets.
1. Connect the appliance to the corresponding GPO.
2. Set the
switch on the outlet to the ‘on’ position.
SHUTTING DOWN THE MCP
1.
Turn all switches on the outlets to the ‘off’ position.
2. Turn the
mains switch (if fitted) to the ‘off’ position, otherwise unplug from mains.