MAKINEX MCP-6-SS, Руководство оператора

Страница: 11 / 23

MCP-6-SS
– User Manual
Page 9 of 21
ASSEMBLING THE WHEELS
The wheels for the MCP, which you will find in one of the lockers, come pre-packaged with
all required fasteners for assembly. Included in the package should be:
- 16 x M8x16 mm Hex Bolt
- 16 x M8 Washer
- 16 x M8 Spring Washer
The tools required for the install are:
- Ratchet or 13 mm Spanner
- 13 mm Socket to suit ratchet
To install the wheels:
1. Open the packaging containing the wheels and the fasteners
2. Each wheel will require four (4) M8x16 mm Hex Bolts, four (4) M8 Washers, and four
(4) M8 Spring Washers.
3. As seen in the image below, fit a spring washer and washer, respectively, to the M8
bolt before passing it through the hole in the wheel and screwing it into the body.
4. Repeat steps 1-3 for each of the four boltholes on each of the four wheels, ensuring
that the matching castors are fastened on the same short end of the body.
SPRING WASHER
WASHER