MakerPi K5 Plus, Руководство пользователя

Страница: 34 / 46

34

Next set the parameters needed for
printing and manually adjust the
position and angle of the model. After
the settings are completed, the
software will compile itself, and
software will display the time and
filament needed for printing after the
compilation completed.
Note: the information provided by the
software can be used to check whether the
filament are sufficient and the platform is
well adjusted.

Click the icon to store the Gcode file
directly into the SD card.
If you want to save the Gcode file
somewhere else, or if you need to rename
the Gcode file, select “Save GCode” in the
“File ” and save it to the appropriate file.

Then insert the USB disk into the USB port.