MakerPi K5 Plus Скачать руководство пользователя страница 6

Страница: 6 / 46

1.2

Cautions

1. The nozzle temperature is up to 200

℃

during the working period of the 3D printer

and after printing. So do not touch the nozzle with your hand;

2. Please follow the instructions in the guide to operate and use the machine. If you

have any questions, you can contact the after-sales department;

3. If the printed model needs to be disassembled for support, please wear gloves so as

not to be scratched by tools or supporting materials during the disassembled process;

4. In daily use,it is necessary to regularly clean and lubricate the optical axis of the cross

slide table of the 3D printer, and be careful not to drip onto the casing or belt when

adding lubricating oil.

5. Reading "User guide", at the same time with the actual operation of the machine will

be more conducive to your operation.

In the printing process encountered a problem with the machine print, you can first

take a photo to reflect the problem more intuitively, at the same time provide the

machine number of photos (the label at the bottom of the back of the machine), and

then contact after-sales.

Содержание K5 Plus















































Результаты поиска

Содержание K5 Plus

Отзывы:

Похожие инструкции для K5 Plus

Бренды по названию

Популярные бренды

MakerPi K5 Plus, Руководство пользователя

Результаты поиска

Содержание K5 Plus

Отзывы:

Похожие инструкции для K5 Plus

Бренды по названию

Популярные бренды