MakerBot Replicator, Руководство по установке

Страница: 4 / 12

4 The Replicator™ Setup Guide
settIng uP the RePlIcatoR™
STeP 1.
Take The ReplicaToR ouT of The Box
now you’re ready to take The
Replicator out of its box. Grasp the
upper frame and be careful to avoid
pinching the internal belts and rods.
Gently pull The Replicator out of its
packaging and place it on your work
surface.
in the packaging underneath you’ll
find the Power Supply and cable, as
well as the usB-a to usB-B cable and
the Filament Guide Tube(s). Take
these out and set them aside.
STeP 2.
open The acceSSoRy Box
Follow the thick black cable to the
Accessory Box. Reach in and grasp
the stepstruder
®
mk8 by its sides.
Leave it in its protective bag and set
it down safely out of the way on your
work surface.
Step 1. Lift The Replicator from the outside edge. Avoid pinching internal
belts and rods.
Step 2. Remove the cardboard insert from the Accessory Box.