REFERENCE
REFERENCE
8
9
SAFETY AND COMPLIANCE
RADIO AND TELEVISION INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules .
These limits are designed to provide reasonable protection against harmful interference
in a residential installation . This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications . However, there is no guarantee
that interference will not occur in a particular installation . If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
• Reorient or relocate the receiving antenna .
•
• Increase the separation between the equipment and the receiver .
•
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected .
•
• Consult the dealer or an experienced radio/TV technician for help .
You may also find helpful the following booklet, prepared by the FCC: “How to Identify and
Resolve Radio-TV Interference Problems .” This booklet is available from the U .S . Government
Printing Office, Washington, DC 20402 .
Changes and modifications not expressly approved by the manufacturer or registrant of this
equipment can void your authority to operate this equipment under FCC rules .
MANUFACTURER
MakerBot Industries, LLC
One MetroTech Center, 21st Floor
Brooklyn, NY 11201
347 .334 .6800
DIAGRAMS
MAKERBOT REPLICATOR MINI FRONT VIEW
1 . Filament Spool Pocket
2 . Gantry
4 . Build Plate
5 . Action Button
1
2
4
5
3
3 . Filament Guide Tube
Содержание Replicator
Страница 1: ...REFERENCE GUIDE...
