tELHARMONIC Panel Controls (Cont’d)
17. CENTROID Panel Control: CENTROID has a different effect on the N, H, and P OUTputs:
-H OUT: modulates or selects harmonics for emphasis by FLUX and H-LOCK parameters.
-P OUT: sets the Phase Modulation Ratio.
-N OUT: has no effect.
18. CENTROID CV Attenuator: bi-polar attenuator for CENTROID CV INput.
19. CENTROID CV IN: control signal INput for CENTROID. Range 0V to 8V.
20. H-LOCK Button/ LED: with FLUX greater than 10%, sets the Harmonic selected by CENTROID parameter
to be locked ON. Multiple Harmonics may be locked ON. LED brightness indicates the number of
Harmonics locked ON. To un-lock Harmonics, set FLUX to 0% or Press and Hold the H-LOCK Button
for one second until the H-LOCK LED fades OFF. This parameter only affects the Harmonic Algorithm.
21. H-LOCK IN: Gate INput for setting Harmonics to be locked ON. Requires a Clock/Gate signal amplitude
of at least 5V and a width of at least 10ms.
18
19
17
21
20
Содержание Soundhack tELHARMONIC
Страница 1: ...v 2 2...