Make Noise Soundhack tELHARMONIC, Руководство пользователя

Страница: 4 / 21

Electrocution hazard!
Always turn the Eurorack case off and unplug the power cord before plugging or un-plugging any Eurorack
bus board connection cable cable.
Do not touch any electrical terminals when attaching any Eurorack bus board cable.
The Make Noise tELHARMONIC is an electronic music module requiring 139mA of +12VDC and 10mA of
-12VDC regulated voltages and a properly formatted distribution receptacle to operate. It must be properly
installed into a Eurorack format modular synthesizer system case.
Go to http://www.makenoisemusic.com/systems.shtml for examples of Eurorack Systems and Cases.
To install, find 14HP in your Eurorack synthesizer case, confirm proper installation of included eurorack bus
board connector cable on backside of module (see picture below), plug the bus board connector cable into
the Eurorack style bus board, minding the polarity so that the RED stripe on the cable is oriented to the
NEGATIVE 12 Volt line on both the module and the bus board. On the Make Noise 6U or 3U Busboard, the
negative 12 Volt line is indicated by the white stripe.
Please refer to your case manufacturers’ specifications for location of the negative
supply.
-12V