Make Noise Soundhack tELHARMONIC, Руководство пользователя

Страница: 21 / 21

Variation:
1. Run QCV through a VCA prior to DEGREE to place chord progression range under voltage control (should still
mult the unaltered QCV to DPO). For example, set DEGREE Panel Control to 12:00, and patch QCV to
the modDemix Channel 1 Input, modulated with a bipolar control signal. Patch Ch.1 Output to DEGREE.
2. Use René CV out to modulate MATHS Fall time for different chord lengths.
3. Patch a slower clock instead of the Pressure Points Gate Output in order to change patterns automatically.
Patch Example:
Chordal Accompaniment Variations (Thanks, Walker Farrell):
Adjust the telHARMONIC’s Tonic Panel Control until it sounds in tune with the DPO’s VCO B Frequency.
Set the DEGREE Panel Control full CCW, Interval to a Triad. Adjust the DPO’s Fold Panel Control full CCW
with the Shape and Angle Controls to taste. Set the DEGREE input attenuator to taste. Adjust or modulate
Centroid, Flux and/or H-LOCK to taste.
Each press of the Pressure Points will select a new chord progression. Sparser Y-Gate settings will yield
sparser accompaniment.
(Adjust to Taste)
Click here to watch on YouTube