MAJORITY SCAFELL PIKE SKP-BAR-BLK, Инструкция по эксплуатации

Страница: 9 / 20

Use the RCA Stereo Audio Cable to connect the TV’s stereo
RCA(L/R). Audio output socket to the AUX(L/R) Sockets of the
unit.
Then press the AUX button on the remote control or press the
source button on the unit to choose the AUX function.
Turn on your television set to use the Majority Scafell Pike.
LINE IN AUX IN
SW.OUT DC 18V OPTICAL
Rear view of the unit
RCA stereo audio cable
AUX IN
Fixing the Soundbar
7
LINE IN AUX IN
SW.OUT
DC 18V
OPTICAL
470mm
Distance between the holes of two metal brackets
If fixing to a solid masonry wall, use a masonry drill bit, drill holes to a
depth of approximately 30mm and insert the wall plugs. Insert the
screws into the wall plugs and drive home the screws until the heads
stand proud of the wall by about 1mm.
If fixing to timber, follow the directions above, but only drill a small
pilot hole for each screw and do not use the wall plugs provided.
If fixing to hollow plaster board walls, use a drill bit suitable for wood
and replace the wall plugs with wall anchors appropriate for the
application. Locate the fixing points into wall studs and cross braces
where possible.
Locate the soundbar onto the screw heads and check that the screws
are fully engaged into the keyhole mount before releasing your hold.