EN 54-16 certified PA/VA System SERIES
5 6 , c h e m i n d e l a Fl a m b è re · 3 1 3 0 0 To u l o u s e · F R A N C E · T é l . 3 3 ( 0 ) 5 6 1 3 1 8 6 8 7
F a x 3 3 ( 0 ) 5 6 1 3 1 8 7 7 3 · c o m m e r c i a l @ m a j o r c o m . f r · w w w . m a j o r c o m . f r
User manual V1.1
5 6 , c h e m i n d e l a Fl a m b è re · 3 1 3 0 0 To u l o u s e · F R A N C E · T é l . 3 3 ( 0 ) 5 6 1 3 1 8 6 8 7
F a x 3 3 ( 0 ) 5 6 1 3 1 8 7 7 3 · c o m m e r c i a l @ m a j o r c o m . f r · w w w . m a j o r c o m . f r
Usermanual V1.1
31
30
SERIES EN 54-16 certified PA/VA System
Page
30
sur
51
ďͿ
“EXEO SOUND ENHANCEMENT” BUTTON
Click to activate the EXEO sound enhancement. EXEO sound enhancement, processes the input signal in
digital mode to achieve optimal levels for broadcast, thus eliminating loss of intelligibility due to clipping
distortion, or due to low input signal levels.
ĐͿ
VUMETER INDICATOR
Displays the signal level detected at the input. Between -100dB and 0dB.
ĚͿ
EQUALIZER BUTTON
Press to activate the equalizer memory configured using the configuration software.
ĞͿ
GAIN INDICATOR
Displays the set gain for the selected audio source.
ĨͿ
GAIN STEP SETTING BUTTON
The gain step setting buttons, allows the selection of the amount of increment/decrement to be
performed in the audio source when you press on the volume adjustment buttons. You can select from
the following options, pressing consecutively: 1dB, 5dB, 10dB.
ŐͿ
VOLUME ADJUSTMENT BUTTONS
The window has two buttons to adjust gain, " +" and "- ", each time you press one of them, it will be
increased or decreased, as many decibels as the " gain step setting button" is displaying.
ŚͿ
MUTE BUTTON
The mute button allows a radical decrease of the volume of the input to a minimum. When the mute is
disabled, the input will recover the volume it had before being silenced.
ϯ͘ϱ͘ϱ
ADVANCED OPTIONS. AUDIO OUTPUT.
ĂͿ
AUDIO OUTPUT SELECTION BUTTONS
In the left half of the screen, there are the audio outputs (output channel for amplifier). Click on the
desired output. If the progress indicator appears (see 2.2.6), use the scroll control to display the rest of
outputs available.
ďͿ
LOUDNESS BUTTON
Press to turn on loudness compensation. Loudness compensation introduces dynamic equalization which
is applied depending on the gain applied to the output channel. If the gain is at maximum, it has no effect.
If the level is different from the maximum, a compensation will be introduced in the bass and treble
levels so that you get an excellent perception of the sound being played.
Picture 35: Audio Output Setting Window
Page
30
sur
51
ďͿ
“EXEO SOUND ENHANCEMENT” BUTTON
Click to activate the EXEO sound enhancement. EXEO sound enhancement, processes the input signal in
digital mode to achieve optimal levels for broadcast, thus eliminating loss of intelligibility due to clipping
distortion, or due to low input signal levels.
ĐͿ
VUMETER INDICATOR
Displays the signal level detected at the input. Between -100dB and 0dB.
ĚͿ
EQUALIZER BUTTON
Press to activate the equalizer memory configured using the configuration software.
ĞͿ
GAIN INDICATOR
Displays the set gain for the selected audio source.
ĨͿ
GAIN STEP SETTING BUTTON
The gain step setting buttons, allows the selection of the amount of increment/decrement to be
performed in the audio source when you press on the volume adjustment buttons. You can select from
the following options, pressing consecutively: 1dB, 5dB, 10dB.
ŐͿ
VOLUME ADJUSTMENT BUTTONS
The window has two buttons to adjust gain, " +" and "- ", each time you press one of them, it will be
increased or decreased, as many decibels as the " gain step setting button" is displaying.
ŚͿ
MUTE BUTTON
The mute button allows a radical decrease of the volume of the input to a minimum. When the mute is
disabled, the input will recover the volume it had before being silenced.
ϯ͘ϱ͘ϱ
ADVANCED OPTIONS. AUDIO OUTPUT.
ĂͿ
AUDIO OUTPUT SELECTION BUTTONS
In the left half of the screen, there are the audio outputs (output channel for amplifier). Click on the
desired output. If the progress indicator appears (see 2.2.6), use the scroll control to display the rest of
outputs available.
ďͿ
LOUDNESS BUTTON
Press to turn on loudness compensation. Loudness compensation introduces dynamic equalization which
is applied depending on the gain applied to the output channel. If the gain is at maximum, it has no effect.
If the level is different from the maximum, a compensation will be introduced in the bass and treble
levels so that you get an excellent perception of the sound being played.
Picture 35: Audio Output Setting Window
Page
30
sur
51
ďͿ
“EXEO SOUND ENHANCEMENT” BUTTON
Click to activate the EXEO sound enhancement. EXEO sound enhancement, processes the input signal in
digital mode to achieve optimal levels for broadcast, thus eliminating loss of intelligibility due to clipping
distortion, or due to low input signal levels.
ĐͿ
VUMETER INDICATOR
Displays the signal level detected at the input. Between -100dB and 0dB.
ĚͿ
EQUALIZER BUTTON
Press to activate the equalizer memory configured using the configuration software.
ĞͿ
GAIN INDICATOR
Displays the set gain for the selected audio source.
ĨͿ
GAIN STEP SETTING BUTTON
The gain step setting buttons, allows the selection of the amount of increment/decrement to be
performed in the audio source when you press on the volume adjustment buttons. You can select from
the following options, pressing consecutively: 1dB, 5dB, 10dB.
ŐͿ
VOLUME ADJUSTMENT BUTTONS
The window has two buttons to adjust gain, " +" and "- ", each time you press one of them, it will be
increased or decreased, as many decibels as the " gain step setting button" is displaying.
ŚͿ
MUTE BUTTON
The mute button allows a radical decrease of the volume of the input to a minimum. When the mute is
disabled, the input will recover the volume it had before being silenced.
ϯ͘ϱ͘ϱ
ADVANCED OPTIONS. AUDIO OUTPUT.
ĂͿ
AUDIO OUTPUT SELECTION BUTTONS
In the left half of the screen, there are the audio outputs (output channel for amplifier). Click on the
desired output. If the progress indicator appears (see 2.2.6), use the scroll control to display the rest of
outputs available.
ďͿ
LOUDNESS BUTTON
Press to turn on loudness compensation. Loudness compensation introduces dynamic equalization which
is applied depending on the gain applied to the output channel. If the gain is at maximum, it has no effect.
If the level is different from the maximum, a compensation will be introduced in the bass and treble
levels so that you get an excellent perception of the sound being played.
Picture 35: Audio Output Setting Window
Page
31
sur
51
ĐͿ
VUMETER INDICATOR
Displays the signal level that is being detected in the output. Between -100dB to 0dB.
ĚͿ
EQUALIZER BUTTON
Press to activate the equalizer memory configured using the configuration application.
ĞͿ
GAIN INDICATOR
Displays the gain setting for the output selected on the volume of the zone.
ĨͿ
GAIN STEP SETTING BUTTON
The gain step setting buttons, allows the selection of the amount of increment/decrement to be
performed in the audio output when you press on the volume adjustment buttons. You can select from
the following options, pressing consecutively: 1dB, 5dB, 10dB.
ŐͿ
VOLUME ADJUSTMENT BUTTONS
There are two buttons to adjust " +" and "- " the gain or volume. Each time you press one of them, it will
be increased or decreased, as many decibels as the " Gain Step Setting" is displaying. This adjustment is
relative to the volume of the zone, therefore, if several output channels are grouped in a zone, it will be
possible to adjust as many dB as the volume of the zone of the selected channel. To carry out this setting,
select the output on which you would like to perform the adjustment, change the value of the volume,
and confirm by pressing " OK".
To cancel, press the " BACK" button. When the gain to be applied to the output will reach its top or
bottom limit (0dB or -100db), it will be blocked. As a result, an output with a theoretical gain of -5dB that
belongs to a zone with the volume adjusted to -10dB, it will display an effective gain of -15dB. When
increasing the output gain, it will get blocked when reaching the value -10dB, that corresponds to 0dB of
output gain (maximum value).
ŚͿ
MUTE BUTTON
The mute button allows a radical decrease of the volume of the output to a minimum. When the mute
is disabled, the output will recover the volume it had before being silenced.
ϯ͘ϱ͘ϲ
ADVANCED OPTIONS. MONITOR
ĂͿ
SELECTION BUTTONS
On the left side of the screen there are buttons for selecting the element to be monitored. Click on the
desired item. If the progress indicator is shown (see 2.2.6) use the scroll control to display the rest of
elements available.
Picture 36: Monitor Window
Page
31
sur
51
ĐͿ
VUMETER INDICATOR
Displays the signal level that is being detected in the output. Between -100dB to 0dB.
ĚͿ
EQUALIZER BUTTON
Press to activate the equalizer memory configured using the configuration application.
ĞͿ
GAIN INDICATOR
Displays the gain setting for the output selected on the volume of the zone.
ĨͿ
GAIN STEP SETTING BUTTON
The gain step setting buttons, allows the selection of the amount of increment/decrement to be
performed in the audio output when you press on the volume adjustment buttons. You can select from
the following options, pressing consecutively: 1dB, 5dB, 10dB.
ŐͿ
VOLUME ADJUSTMENT BUTTONS
There are two buttons to adjust " +" and "- " the gain or volume. Each time you press one of them, it will
be increased or decreased, as many decibels as the " Gain Step Setting" is displaying. This adjustment is
relative to the volume of the zone, therefore, if several output channels are grouped in a zone, it will be
possible to adjust as many dB as the volume of the zone of the selected channel. To carry out this setting,
select the output on which you would like to perform the adjustment, change the value of the volume,
and confirm by pressing " OK".
To cancel, press the " BACK" button. When the gain to be applied to the output will reach its top or
bottom limit (0dB or -100db), it will be blocked. As a result, an output with a theoretical gain of -5dB that
belongs to a zone with the volume adjusted to -10dB, it will display an effective gain of -15dB. When
increasing the output gain, it will get blocked when reaching the value -10dB, that corresponds to 0dB of
output gain (maximum value).
ŚͿ
MUTE BUTTON
The mute button allows a radical decrease of the volume of the output to a minimum. When the mute
is disabled, the output will recover the volume it had before being silenced.
ϯ͘ϱ͘ϲ
ADVANCED OPTIONS. MONITOR
ĂͿ
SELECTION BUTTONS
On the left side of the screen there are buttons for selecting the element to be monitored. Click on the
desired item. If the progress indicator is shown (see 2.2.6) use the scroll control to display the rest of
elements available.
Picture 36: Monitor Window
