Major Verge, Руководство оператора и список запчастей

Страница: 5 / 28

www.major-equipment.com 1
Introduction
Thank you
We appreciate having you as a customer and wish you many years of safe and satis fi ed use of your machine.
Using Your Operator’s Manual
This manual is an important part of your machine and should remain with the machine when you buy it. Reading your
operator’s manual will help you and others avoid personal injury or damage to the machine. Information given in this
manual will provide the operator with the safest and most effective use of the machine.
Sections in your operator’s manual are placed in a speci fi c order to help you understand all the safety messages so you
can operate this machine safely. You can also use this manual to answer any speci fi c operating or servicing questions.
Safety Issues
Your manual contains special messages to bring attention to potential safety concerns, machine damage as well as
helpful operating and servicing information. Please read all the information carefully to avoid injury and machine damage.
Product Identifi cation
Machine Serial Numbers
If you need to contact MAJOR or your MAJOR dealer for information on servicing or spare parts, always provide the
product model and serial numbers.
We suggest that you record your machine details below:
Model No: ____________________________________
Serial No: ____________________________________
Date of Purchase: ____________________________________
Dealer Name: ____________________________________
Dealer Telephone: ____________________________________
Register Your Product and Warranty Online
To register your product through the Internet, simply go to the Support section on www.major-equipment.com. Completing
the information, either online or with the product warranty card, will ensure the customer that their product receives all
post sales service and important product information.
Product Specifi cations
MODEL OSM-1400 OSM-2000 OSM-2650
Cutting width
1.35m (4’ 5”) 1.975m (6’ 5”) 2.65 (8’ 8”)
Number of Rotors
2 3 4
Number of Blades
4 / 8 6 / 12 8 / 16
Sliding Offset
1564mm 1564mm 1564mm
RPM
540 rpm/min 540 rpm/min 540 rpm/min
Power Requirements
40 HP 60 HP 80 HP
Hedge cutting
0÷96° 0÷96° 0÷96°
Mowing of road sides
0÷45° 0÷45° 0÷45°
Tractor class
II II II
Weight
685kg 800kg 905kg