13
7.9. Continuity Measurements
3. Use the MODE button to select continuity " ". The display icons will
change when the MODE button is pressed.
4. Touch the test probe tips across the circuit or component under test.
2. Set the function switch to the
Ω
position.
5. lf the resistance is < 50
Ω
, a tone will sound.
1. lnsert the black test lead into the negative COM terminal and the red
test lead into the
V CAP TEMP Hz%
Ω
positive terminal.
2. Press and hold the
MODE/VFD
key and turn the selector switch to turn
the system on, the auto power off function will be cancelled.
7.11. MODE/VFD (Variable Frequency Drive)
1. To freeze the LCD reading, press the
Hold/Flashlight
button. While
data hold is active,the
HOLD
icon appears on the LCD. Press the
button again to return to normal operation.
2. lf AC voltage is present, the detector light will illuminate.
1. Touch the probe tip to the live conductor or insert into the live side of
the electrical outlet.
NOTE:
The conductors in electrical cord sets are often twisted. For best
results, rub the probe tip along a length of the cord to assure placing
the tip in close proximity to the live conductor.
3. Press the
Hold/Flashlight
button to turn the Flashlight on. Press again
to turn the Flashlight off.
1. Press
MODE/ VFD
key to select the double measurement functions.
This key is active in
V CAP
Ω
position to select among resistance
test, diode test, continuity test, HZ%, and in Temp position to select
between °F or °C.
7.10. Non-Contact AC Voltage Measurements
WARNING:
Risk of Electrocution. Before use, always test the Voltage
Detector on a known live circuit to verify proper operation
NOTE:
The detector is designed with high sensitivity. Static electricity or
other sources of energy may randomly trip the sensor. This is normal
operation.
3. Press and hold the MODE/VFD key for 2 seconds to switch to VFD.
7.12. HOLD/Flashlight
2. The LCD is equipped with backlighting for easier viewing, especially in
dimly lit areas.
Содержание MT720
Страница 1: ...MT720 AC TRMS CLAMP METER INSTRUCTION MANUAL II...
Страница 2: ...2...