1. Set the function switch to the
VAC
position.
2. Insert the black test lead banana
plug into the negative
COM
jack.
3. Insert red test lead banana plug
into the positive
V
jack.
4. Read the voltage in the main
display.
4.3. AC Voltage Measurements
4.4. Frequency Measurements
1. Set the function switch to the
Hz%
position.
2. Insert the black test lead banana
plug into the negative
COM
jack.
3. Insert the red test lead banana
plug into the positive
V
jack.
4. Read the Frequency in the display.
5. Press the
MODE
key to switch the
Duty functions.
6. Read the Duty in the display.
WARNING:
Risk of Electrocution. The probe
tips may not be long enough to contact the live
parts inside some 240V outlets for appliances
because the contacts are recessed deep in the
outlets. As a result, the reading may show 0
volts when the outlet actually has voltage on it.
Make sure the probe tips are touching the metal
contacts inside the outlet before assuming that
no voltage is present
CAUTION:
Do not measure
AC
voltages if a
motor on the circuit is being switched
ON
or
OFF
.
Large voltage surges may occur that can damage
the meter.
MAX 10A
12