Major tech MT2005, Руководство пользователя, Страница: 11 / 40

4. DMM Measurement and Setup
1. Set the function switch to the VDC
position.
2. Insert the black test lead banana
plug into the negative COM jack.
3. Insert the red test lead banana
plug into the positive V jack.
4. Read the voltage in the display.
4.1. DC Voltage Measurements
CAUTION : Do not measure DC voltages if a
motor on the circuit is being switched ON or
OFF . Large voltage surges may occur that can
damage the meter.
4.2. AC+DC Voltage Measurements
1. Set the function switch to the VDC
position.
2. Insert the black test lead banana
plug into the negative COM jack.
3. Insert the red test lead banana
plug into the positive V jack.
4. Press the MODE key to switch the
V AC +DC Voltage functions.
5. Read the AC+DC voltage in the
display.
CAUTION : Do not measure DC voltages if a
motor on the circuit is being switched ON or OFF .
Large voltage surges may occur that can damage
the meter.
MAX 10A
11