15
Majestic • MARQ42STIN Owner Manual • 2272-981 Rev. L • 12/20
Appliance ON/OFF:
Your MARQ42STIN fireplace is supplied with a fully
functional remote control. This remote controls:
• ON/OFF Functions
• Flame height adjustments
• Thermostat
• Accent Lights
• Electric Ember Bed
• Cold Climate Feature
Please refer to the instructions included with the remote
control for more detailed operating instructions.
DANGER
DANGER
IntelliFire
TM
Touch Ignition System
NOTICE:
Batteries should not be placed in the battery
pack while using the transformer. Remove batteries before
using the transformer, and unplug the transformer before
installing the batteries. Battery polarity must be correct or
module damage will occur.
CAUTION!
Risk of burns!
Appliance surfaces are hot
when operating and during cool down. Use care and
wear gloves when opening the front and accessing com-
ponents inside the appliance.
- Be aware the appliance may be HOT, use
care in accessing the IFT-ECM.
- Set the IFT-ECM 3-position selector switch to
OFF position.
- Wait five (5) minutes to allow possible
accumulated gas to clear.
- Set the IFT-ECM 3-position selector switch to ON
or REMOTE position. Module will beep once and
flash a three GREEN LED code on successful
startup.
- If placed in ON position, the appliance will ignite
normally if the error condition was corrected.
- If placed in REMOTE position, use the paired IFT-
RC400, IFT-RC150 or wired wall switch to start
the appliance; appliance will ignite normally if the
error condition was corrected.
- If the IFT-ECM re-enters the lock-out condition
after these steps, call your dealer for service.
