Majestic • MARQ42STIN Owner Manual • 2272-981 Rev. L • 12/20
12
H. Heat Management
Heat Output
Heat output may be controlled on MARQUIS models by
adjusting the “FLAME” setting on the remote control.
H. Appliance Break-In
NOTICE! Open windows for air circulation during
fireplace break-in.
• Some people may be sensitive to smoke and odors.
• Smoke detectors may activate.
Follow the initial break-in procedure below to cure the
materials used to manufacture the fireplace and the
finishing materials around it.
• The fireplace should be run three to four hours
continuously on high.
• Turn the fireplace off and allow it to cool completely.
• Remove fixed glass assembly. See Section 4.B.
• Clean fixed glass assembly. See Section 4.B.
• Replace the fixed glass assembly.
NOTICE!
In some cases, residue may appear on the
top fiber refractory piece at the end of the initial break-in
period. Remove the residue by gently brushing with a
soft-bristle brush.
Note:
Some installations may require additional run time
to cure. If odors persist after the initial break-in period,
run the fireplace for an additional three to four hours
continuously on high.
Note:
Some IPI systems have a safety feature that
automatically shuts down the fireplace after 9 hours of
continuous operation without receiving a command from
the remote control. If this occurs, restart the appliance.
