23
Vermont Castings, Majestic Products Chateau™
20006081
Log Rear F1
LG294
Fig. 44 Place log rear onto rear log bracket.
Log Left
Front F3
Log Right
Front F2
LG295
Fig. 45 Place logs left front and right front.
9. Hold the log top right front to back with the narrower
end toward the back. With your left hand, tilt the
front left log slightly up and forward. With your right
hand position the fat end of the top right log on the
small shelf on the back of the front right log. Lower
the two logs in place until the narrower end of the
top right log comes in contact and rests on the top
right side of the rear log. (Fig. 46)
10. Hold the log top left at an angle with the burned
area toward the middle. Set the top left log above
the front left log, matching the indentation on the
bottom of the top left log with the protrusion on the
front left log. Lay the back end of the top left log
onto the rear log. (Fig. 46)
11. Hold the log top middle at an angle with the curve
of the log going from right to left. Position the front
end of the top middle log over the right front log,
matching the protrusion on the right front log with
the indentation on the bottom of the top middle log.
Lay the back end of the middle log onto the rear log
and swing the end of the log from right to left until
the end of the top middle log comes in contact with
the top left log. (Fig. 46)
LG297
Fig. 47 DVT44 logset.
Log Top Middle F5
Log Top Right
F4
Log Top
Left F6
LG296
Fig. 46 Place middle logs.
LG315
Fig. 48 DVT38 logset.
