37
BDVR Series Direct Vent Gas Fireplace
10003357
Either remove the top and bottom brass window
trims or take care not to scratch them during the
installation of the screen kit.
1. Slide the tabs on the top edge of the window screen
assembly up into the slots in the underside of the top
rail of the window frame assembly.
2. With the tabs in the slots, place the screen down
against the glass.
3. Slide the screen down the glass until the bottom
edge of the screen sits in the gap between the
bottom rail of the window frame assembly and the
window doors.
To remove the screen for glass cleaning reverse the
installation procedures.
Bay window kits are available for the 33BDVT/
33BDVR, 36BDVT/36BDVR & 39BDVT/39BDVR
model appliances.
When fitting the Bay Window Kits the
original window frame assembly must
remain in place. The Bay Window kit is
fitted over the existing front glass.
Installation Refer to Figure 56
1. Remove the upper and lower brass window trims.
2. Remove the existing bottom louvre assembly
complete with the hinges.
3. Remove the top louvre assembly.
4. Assemble the Bay Window Kit according to the
instructions supplied with the kit.
5. Place the 2 pieces of ceramic refractory along the
base of the bay window.
6. Hang the Bay Window Assembly over the existing
window frame assembly.
7. Reinstall the upper louvre assembly.
Decorative Bay Windows
Do not remove the existing window frame
assembly.
Top Louvre
Bay
Window
Frame
Ceramic
Refractory
Spacers
Bottom
Louvre
Assemblies
Screws
Bottom Brass
Trim
Ceramic
Refractory
FP1234
Fig. 56 Bay window isntallation.
Bay Window Screen
Bay window Screen kits are available for the 33BDVT/
33BDVR & 36BDVT/36BDVR model appliances.
Do not remove existing window frame
assembly! Remove all plastic from brass
trims.
1. Let the fireplace cool down if it has been operating.
2. Remove existing top louvre from fireplace by lifting
up and pulling out.
3. Hang Bay Window Screen assembly over top of the
existing glass frame.
Window Frame
Assembly
Front Window Screen
FP1233
Fig. 55 Front window screen.
Optional remote control units are available to control
different functions of the appliances
Model
Function/s Controlled
MRCI
ON/OFF
MRC2
ON/OFF and Temperature
MRC3
ON/OFF and Temperature
control with a digital display
and programmable 24 hour clock
IMT
Wall mounted thermostat control
(must be used in bedroom installations)
Remote Controls
CFM178
Fig. 57 Bay window screen assembly.
