Majestic fireplaces GBR36 Series, Руководство пользователя и инструкция по установке для владельцев жилья

Страница: 7 / 28

7
GBR Series B-Vent Gas Fireplace
7412955
Gas Line Installation
This appliance must be isolated from the gas supply
piping system by closing its individual manual shut off
valve during any pressure equal to or less than 1/2 psig
(3.45 kPa).
The appliance and its individual shutoff valve must be
disconnected from the gas supply piping system during
any pressure testing of that system at test pressures in
excess of 1/2 psig (3.45 kPa).
If gas piping from the source to the appliance location
has not been accomplished, install the required pipe.
Consult local plumbing code to assure proper pipe size.
The gas pipeline can be brought in through the right
side of the appliance. An access hole is provided to
allow for the gas pipe installation and testing of any gas
connection. It is most convenient to bring the gas line
in from the right side, as this allows fan installation or
removal without disconnecting the gas line.
NOTE: The gas line connection can be made with 3/8"
copper tubing, 1/2" rigid pipe or an approved flex con-
nector, then reduced to 3/8" to the appliance. Because
some municipalities have some additional local codes,
it is always best to consult your local authority.
WF625
GBR36
2/11/98
Parts Identification and Chase Installation
Fig. 4 Parts identification and system installation.
(Insulation methods shown are optional for cold climate, not a require-
ment for unit operation.)
FP625
NOTE: Do not install header until
unit is in place. Refer to Page 4,
"Mounting the Appliance." Fram-
ing headers may rest on top of
standoffs and be positioned on
end rather than lying flat.
Batt Insulation
(cut out around
firestop)
Firestop
Ceiling Level
Termination Cap
Storm Collar
Pan Flashing
Draftstop
Standoff
Surround
Screen
Grate
Firebox
Nailing Flange
Electrical
Access
Outside Air
Cover Plate