10
majacraft
Required:
1 - Bobbin
1 - flyer
11. Bobbin and Flyer
If you have some petroleum jelly or vaseline, rub a small smear onto the flyer shaft. This has already
been done at the factory so is not essential. Now slide the bobbin on.
EXTRA
If you are not certain of the connection arrangement, here is a
full description.Place the wheel directly in front of you so you are
looking at the crank assembly attached to the drive wheel. The
rubber joiner that is on the conrod/footman that is closest to you
goes into the hole in the pedal on your left. The joiner on the conrod
that is furthest from you goes into the hole in the pedal that is on
your right.
The brake band is recommended to be crossed. From
the spring pin,the brake band should go up and over
the top of the bobbin then round underneath and back
up the the tension knob.
11b
11a
10f
10c
10d
10e
