MyPower S4220 & S4320 Series Switch Installa
tion Manual V1.0
Maipu Confidential & Proprietary Information
Page 57 of 80
A
P P ENDIX TA B L E
A - 11
D
ESCRIP TIO N O F T HE
R M2B- 1CE 1
INTE RF A CE DA UG HTER CA RD
Interface Name
Description
0
Channelized CE1 interface of the TDM type
The meaning of the indicator on the RM2B-1CE1 interface daughter card is shown in the
following table.
A
P P ENDIX TA B L E
A - 12
T
HE MEA NI NG O F THE
R M2B- 1CE 1
IN TERF A CE DA UGHT ER CA RD
Indicator Name
Indicator Color
Status
LINK
Green
Off: indicates that the link is not connected.
Flash: indicates that the loop is detected on the
line.
Always on: indicates that the link is connected.
A.2.6 RM2B-2CE1
The RM2B-2CE1 interface daughter card provides two-path channelized CE1 interface of the
TDM type through two RJ-45 interfaces.
The panel view of the RM2B-2CE1 card is shown in the following figure.
A
P P ENDIX F IG URE
A - 6
A
P P EA RA NCE O F T HE
RM2 B- 2CE 1
CA RD
The description of the RM2B-2CE1 interface daughter card is shown in the following table.
A
P P ENDIX TA B L E
A - 13
D
ESCRI P TIO N O F T HE
R M2B- 2CE 1
INTE RF A CE DA UG HTER CA RD
Interface Name
Description
0-1
Channelized CE1 interface of the TDM type
The menaing of the indicator on the RM2B-2CE1 interface daughter card is shown in the
following table.
A
P P ENDIX TA B L E
A - 14
T
HE MEA NI NG O F THE
R M2B- 2CE 1
IN TERF A CE DA UGHT ER CA RD
Indicator Name
Indicator Color
Status
LINK
Green
Off: indicates that the link is not connected.
Flash: indicates that the loop is detected on the line.
Always on: indicates that the link is connected.
A.2.7 RM2B-1SA
The RM2B-1SA interface daughter card provides one-path V.24 or V.35 communication through
one SDB26 (female) interface. The protocol type is selected based on the cable.
