1. Align the corresponding hole of the RIGHT BACK PANEL ( G ) and PARTITION ( E ) as
figure shown below.
2. Insert the CAM LOCK ( 2 ) into the corresponding hole ( the direction of the notch is
aligned with the cam bolt as the figure shown below).
3.
Use a hand screwdriver to turn the CAM LOCK ( 2 ) clockwise to secure the cam bolt.
Page 20
Please call for replacement parts or assistance: 1-888-568-3818
Young Chain Company Limited
15
2
2
CAM LOCK
×2
2
ASSEMBLY
Make sure edge of both panel
align and even
The direction of the
notch of the cam
lock is aligned with
the cam bolt.
