1. Align the corresponding hole of the RIGHT BACK PANEL ( G ) and RIGHT SIDE PANEL
( D ) as figure shown below.
2. Insert the CAM LOCK ( 2 ) into the corresponding hole ( the direction of the notch is
aligned with the cam bolt as the figure shown below).
3. Use a hand screwdriver to turn the CAM LOCK ( 2 ) clockwise to secure the cam bolt.
ASSEMBLY
Page 19
Please call for replacement parts or assistance: 1-888-568-3818
Young Chain Company Limited
CAM LOCK
×2
2
Make sure edge of both panel
align and even
14
The direction of the
notch of the cam
lock is aligned with
the cam bolt.
