N
22
1. Align and insert the DRAWER LEFT PANEL ( J ) and DRAWER RIGHT PANEL
( K ) into the corresponding holes of DRAWER FRONT PANEL ( I ).
2. Align and insert the SUPPORT BAR ( N ) into the corresponding hole of DRAWER
FRONT PANEL ( I ).
3. Insert the CAM LOCK ( 2 ) into the corresponding hole ( the direction of the notch is
aligned with the cam bolt as the figure shown below ).
4. Use a hand screwdriver to turn the CAM LOCK ( 2 ) clockwise to secure the cam bolt.
*
*
Repeat all steps for all 4 drawers.
Page 27
ASSEMBLY
Please call for replacement parts or assistance: 1-888-568-3818
Young Chain Company Limited
K
CAM LOCK
×20
2
Groove
should align
and even
The direction of the
notch of the cam
lock is aligned with
the cam bolt.
I
