18
Kleiss MCS60-1016 System Manual v.15 June 2020
|
www.MainlineControlSystems.com
Attach pilot drill to drilling rod then attach proper
cutter by means of the cutter assembly bolts.
Figure A:
Steel and cast iron cutter [13200725] and pilot
drill [14300054] with adapter [10310785]. Thread
the pilot drill into the drilling rod.
Figure B:
PE cutter [13100100] and pilot drill [13200727].
Secure the pilot drill using the set screw on the
drilling rod.
A:
B:
If cutting through steel or cast iron, grease the
cutter and pilot drill with the cutting grease for
better drilling results.
If cutting through PE or PVC, skip this step.
Retract the cutter completely into the drilling
dome. No part of the cutter should be visible.
When retracting into the drilling dome, the cutter
should be in the position as shown in the picture.