28
Kleiss MCS60-1016 System Manual v.15 June 2020
|
www.MainlineControlSystems.com
NOTE: For larger stoppers with extended metal
tips, make certain the stopper tip is rotated so the
rounded curve of the stopper tip will slide along
angled part of chute when deployed. The metal tip
should be going the same direction as arrow on
tower.
Pull stopper up into tower.
ALTERNATE STOPPER ATTACHMENT:
Stopper may be attached to stopper rod and
inserted through the top of the tower instead of
being pulled up into the tower like previously
noted.
After selecting the appropriate stopper, begin to
take the stopper rod out of the tower by loosening
the four wing nuts on the black cap and flipping
the bolts off from the black cap as pictured.
With some force, pull black cap off from tower
until stopper rod is completely exposed.
