20
Kleiss MCS60-1016 System Manual v.15 June 2020
|
www.MainlineControlSystems.com
Attach bridge stands (both rods) to top of drilling
dome.
Make sure the slide gate valve is open.
Pull out the bayonet lock on tapping device and
lower drilling rod until pilot drill touches the
surface of the pipeline to be tapped.
When doing this, make sure the bayonet lock is in
a free position and does not lock into the drilling
rod.
After the pilot drill is in contact with the pipeline,
lock the feed tube to the drilling rod at the closest
hole on the drilling rod using the bayonet lock. Do
this by either rotating the feed tube until it locks in
place or pulling up on drilling rod.
Locked