Mainca BC-1800, Руководство пользователя

Страница: 15 / 59

12
To switch the machine on, it is essential to have read the instructions and follow them
step by step. If in any doubt contact your local dealer or Equipamientos Carnicos SL
directly. The machine cannot be operated with the door open or without the follow
through guard in case of being the model with fixed table or, for the model with
folding moving table, will be obligatory the use of the follow through guard while the
table is folded and the use of the moving table with front protector in superior position
and blade protector regulated to the suitable height.
To use the machine, it is essential to have read at all the instructions and to follow
the indications of installation and use. In case of needing some explanation please,
not doubt in contacting with its supplier, or, with Equipamientos Cárnicos, S.L.
directly.
The machine will never be used with moving table folded and/or follow through guard
disassembled, depending on model.
INSTRUCTIONS FOR USE.
Before working on machine ensure it is placed on a sound level surface at the correct
working height. Check the alignment and tension of the blade (Fig. 5). The door is
locked (B).
When slicing meat with bone one should take care by exerting greater pressure when
slicing meat as against bone, in order to protect the band and avoid excessive strain
on the motor.
Never try to alter the direction of the cut once you are cutting as you run the risk of
snapping the blade and cause it to whip.
Likewise, when cutting bone or frozen meat, do not attempt to reverse your action as
you may slip the band from its pulley.
Whenever possible, try to position the product so that the meat side is cut before the
bone.
When working with bone or frozen meat blades, ensure the
scrapers (E) are forced backwards so that the blade teeth do
not touch.
When refitting the meat band, position the scrapers again close
to the teeth, so that it nears the tip. This is very important to
leave a clean and perfect cut.
IN CASE OF EMERGENCY, PRESS THE RED STOP
BUTTON (D)
In case of any doubts contact the manufacturer Equipamientos
Carnicos SL.
Important observation:
After long use or because the saw blade has been forced, the band may develop a
twist. This is clearly visible, simply hold the band at its middle and observe that it
does not look straight, but rather it has developed a twist like in figure 4.
In BM-3000JV, if necessary the machine has an unloading ramp, to its use must rise
to the cover (Z) up to 90º
4