Main Eco Compact Heat 15 Скачать руководство пользователя | Manualshive

Страница: 9 / 64

background image

7726859-01 (1/19)

Eco Compact Heat

9

Introduction

1

1.5

Extent of Liabilities

1.5.1 Manufacturer's Liability

Our products are manufactured in compliance with the
requirements of all applicable Directives and Regulations. They
are therefore delivered with marking and all relevant
documentation. In the interest of customers, we are
continuously endeavouring to make improvements in product
quality. All the specifications stated in this document are
therefore subject to change without notice.

The manufacturer will not accept any liability for loss, damage or
injury arising as a result of:-

     Failure to abide by the instructions on using the appliance.
   Failure to regularly maintain the appliance, or faulty or
   inadequate maintenance of the appliance.
   Failure to abide by the instructions on installing the
   appliance.

This company declares that no substances harmful to
health are contained in the appliance or used during
appliance manufacture.

The appliance is suitable only for installation in GB and IE and
should be installed in accordance with the rules in force, and
only used in a suitably ventilated location.

in gB,

the installation must be carried out by a Gas Safe

Registered Installer. It must be carried out in accordance with
the current and relevant requirements of legislation and
guidance including the:-
• Gas Safety (Installation & Use) Regulations.
• The appropriate Building Regulations either The

Building Regulations, The Building Regulations
(Scotland), Building Regulations (Northern Ireland).

• The Water Fittings Regulations or Water Byelaws in

Scotland.

• The Current I.E.E. Wiring Regulations.

Where no specific instructions are given, reference should be
made to the relevant British Standard Code of Practice.

in iE,

the installation must be carried out by a competent person

and installed in accordance with the current edition of I.S. 813
‘Domestic Gas Installations’, the current Building Regulations
and reference should be made to the current ETCI rules for
electrical installation.

Prior to commissioning all systems must be thoroughly
flushed and treated after installation with inhibitor (see
section 5.2.6). Failure to do so will invalidate the appliance
warranty.

Incorrect installation could invalidate the warranty and may lead
to prosecution.

«
...
7
8
9
10
11
...
»

Содержание Eco Compact Heat 15

































































Отзывы:

Нет отзывов

Похожие инструкции для Eco Compact Heat 15

Vitodens 050-W BP JD

Бренд: Viessmann Страницы: 92

Бренд: Marco Страницы: 43

Бренд: Riello Страницы: 28

LAARS OmniTherm ONH1250

Бренд: Bradford White Страницы: 132

Бренд: Sime Страницы: 12

Бренд: Camus Hydronics Страницы: 90

Бренд: OSO HOTWATER Страницы: 24

Бренд: Raypak Страницы: 6

Бренд: Siemens Страницы: 20

Бренд: Zanussi Страницы: 72

Heatpac 12-18kW

Бренд: FireBird Страницы: 36

Бренд: Fröling Страницы: 76

Lambdatronic SP 3200

Бренд: Fröling Страницы: 129

ATLAS D ECO 34 COND SI UNIT

Бренд: Ferroli Страницы: 112

Бренд: kunzel Страницы: 32

Бренд: Potterton Страницы: 26

Knockdown RV-500

Бренд: Bryan Boilers Страницы: 2

Бренд: Rinnai Страницы: 61

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды